Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1659 of 1904 2022-03-04
Not Subject to NDA
3.28.1.2. AT$LCSTER - Update Terminal Information
This command updates the terminal information like IMSI, MSISDN or IPv4 address.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT$LCSTER=<idType>[,<idValue>[,<prefPosMode>[,<tlsMode>]]]
Set command updates the terminal information like IMSI, MSISDN or IPv4
address.
Parameters:
Name
Type
Default
Description
<idType>
integer
1
a number which can have any of the
following values
Values:
0
:
MSIDSN
1
:
IMSI
2
:
IPv4 address
3
:
invalid
<idValue>
string
-
a string, as defined in <idType>
<prefPosMode>
integer
0
preferred position mode
Values:
0
:
default position mode
1
:
none preferred position mode
<tlsMode>
integer
1
indicates if TLS mode should/should
not be used by the SET
Values:

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English