Telit Wireless Solutions LE910C series - AT#ACALEXT - Extended Automatic Call

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 75 of 1904 2022-03-04
Not Subject to NDA
3.1.5. AT#ACALEXT - Extended Automatic Call
This command enables the extended automatic call function.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
AT#ACALEXT=<mode>,<index>
Set command enables/disables the extended automatic call function.
Parameters:
Name
Type
Default
Description
<mode>
integer
0
enables/disables the automatic call
function to a contact in the selected
phonebook
Values:
0
:
disable
1
:
enable, internal phonebook
2
:
enable, "SM" phonebook
3
:
enable, "ME" phonebook
<index>
integer
0
position in the currently selected
phonebook
Value:
0÷max
:
index
The max value of <index> is given by the test command.
If the extended automatic call function is enabled and &D2 has
been issued, the transition OFF/ON of DTR causes an automatic