Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 198 of 1904 2022-03-04
Not Subject to NDA
3.2.2.52. AT+CMUX - Multiplexing Mode
This command is used to enable/disable the multiplexing protocol control channel.
GSM 07.07, GSM 07.10
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT+CMUX=<mode>[,<subset>[,<port_speed>[,<N1>]]]
Set command is used to enable/disable the multiplexing protocol control
channel.
Parameters:
Name
Type
Default
Description
<mode>
integer
0
basic option is currently the only
supported mode.
Value:
0
:
basic option mode
<subset>
integer
N/A
UIH frames used only; it is currently
the only supported value.
Value:
0
:
UI frames used only
<port_speed>
integer
1
transmission rate (fixed with 1 and
changes do not affect the actual
behavior. dummy value)
Values:
1
:
9600 bps

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English