Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1525 of 1904 2022-03-04
Not Subject to NDA
3.23.2. AT#SMSATRUNCFG - Set SMS Run AT Service Parameters
This command configures the SMS AT RUN service.
Telit Running AT Commands Remotely Application Note, 80000NT10029a
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#SMSATRUNCFG=<instance>[,<urcmod>[,<timeout>]]
Set command configures the SMS AT RUN service.
Parameters:
Name
Type
Default
Description
<instance>
integer
3
AT instance that will be used by the
service to run the AT Command
Value:
1÷3
:
AT instance
<urcmod>
integer
1
enable/disable unsolicited.
Values:
0
:
disable unsolicited message
1
:
enable an unsolicited message when an AT
command is requested via SMS
<timeout>
integer
5
It defines in minutes the maximum time
for a command execution. If timeout
expires the module will be rebooted.
Value:
1÷60
:
Range in minutes

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English