Telit Wireless Solutions LE910C series - AT#CEERURC - Extended Error Report Unsolicited Response

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 176 of 1904 2022-03-04
Not Subject to NDA
3.2.2.42. AT#CEERURC - Extended Error Report Unsolicited Response
This command enable/disable the +CEER URC
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#CEERURC=<mode>
Set command enable/disable the +CEER URC presentation regards some
error condition that may occur. (See +CEER AT command).
Parameter:
Name
Type
Default
Description
<mode>
integer
0
Values:
0
:
Disable the presentation of the +CEER URC (default
value).
1
:
Enable the presentation of the +CEER URC.
AT#CEERURC?
Read command returns current value of the <mode> parameter:
#CEERURC: <mode>
AT#CEERURC=?
Test command reports the supported range of values for parameter
<mode>