Telit Wireless Solutions LE910C series - AT#SECIFAUTH - Secure Interface Authentication

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 231 of 1904 2022-03-04
Not Subject to NDA
3.2.2.69. AT#SECIFAUTH - Secure Interface Authentication
This command will be gotten an authentication with password.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#SECIFAUTH=<pwd>
This command will be gotten an authentication with password.
Parameter:
Name
Type
Default
Description
<pwd>
string
-
The credentials are 10 ~ 16 characters and
alphanumeric with capitals complexity.
Default password is “0123456789”.
AT#SECIFAUTH?
Read command returns the values in the following format:
#SECIFAUTH: <current authentication status>
0 : No authentication requirement
1 : Require authentication
2 : Authenticated
Ex)
AT#SECIFAUTH?
#SECIFAUTH: 1
OK
AT#SECIFAUTH=?