Telit Wireless Solutions LE910C series - AT#SI - Socket Info

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1262 of 1904 2022-03-04
Not Subject to NDA
3.17.18. AT#SI - Socket Info
This command is used to get socket information.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#SI[=<connId>]
Execution command returns information about all sockets data traffic.
Parameter:
Name
Type
Default
Description
<connId>
integer
N/A
socket connection identifier
Value:
1÷conMax
:
supported range (conMax value is returned
by test command)
Additional info:
The response format is:
#SI: <connId>,<sent>,<received>,<buff_in>,<ack_waiting>[,<cause>]
Name
Type
Default
Description
<connId>
integer
-
socket connection identifier
<sent>
integer
-
total amount (in bytes) of sent data
since the last time the socket
connection identified by <connId> has
been opened
<received>
integer
-
total amount (in bytes) of received data
since the last time the socket