Telit Wireless Solutions LE910C series - AT#APLAY - Play an Audio File

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1049 of 1904 2022-03-04
Not Subject to NDA
3.12.7.4. AT#APLAY - Play an Audio File
This command plays an audio file.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#APLAY<mode>[,<dir>,<filename>[,<volume>]]
This command plays audio file on the speaker or uplink path.
When the playing is ended, the following URC is displayed showing the
playing result code.
#APLAYEV: <result>
For <result> code values see unsolicited code value section.
Parameters:
Name
Type
Default
Description
<mode>
integer
0
playback mode
Values:
0
:
stop playback, optional parameters are ignored
1
:
start playback, optional parameters <dir> and
<filename> are mandatory
<dir>
integer
0
audio path selection
Values:
0
:
send to the speaker
1
:
send to the uplink path
<filename>
string
-
file name, maximum character length is
16.
It is mandatory to specify the file