Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1625 of 1904 2022-03-04
Not Subject to NDA
3.27.2. AT#M2MCHDIR - M2M File System Change Current Directory
This command manages the M2M File System.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#M2MCHDIR=<path>
Set command sets the current working directory in the M2M file system.
Parameter:
Name
Type
Default
Description
<path>
string
-
can be:
- full directory path name starting with "/"
- relative directory path name
- directory name (in current directory)
Maximum full directory length is 128 chars, maximum folder name
is 64 chars.
If <path> is not present an error code is reported.
<path> is case sensitive.
<path> can be equivalently enclosed on quote or not.
Path separator must be "/".
The current directory in M2M file system at every power on is
"/data/azc/mod".
AT#M2MCHDIR?

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English