Telit Wireless Solutions LE910C series - AT#RNDISC - Remote Network Driver Interface Specification Configure

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1205 of 1904 2022-03-04
Not Subject to NDA
3.16.1.5. AT#RNDISC - Remote Network Driver Interface Specification configure
This command configures Remote Network Driver Interface Specification (RNDIS)
session.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#RNDISC=<Did>,<Parid>,<Par>
This command configures Remote Network Driver Interface Specification (RNDIS)
session.
Parameters:
Name
Type
Default
Description
<Did>
integer
-
Device id, currently limited to 0 (only one
device)
<Parid>
integer
N/A
Parameter id
Values:
0
:
customer address
1
:
custom mask
2
:
custom gateway
3
:
custom dns 1
4
:
custom dns 2
5
:
device name
<Par>
string
-
a valid parameter in proper format or range
Additional info:
This command only works in RNDIS mode.