Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1706 of 1904 2022-03-04
Not Subject to NDA
3.28.1.22. AT$XTRAEN - GpsOneXTRA feature control
This command enables/disables the GpsOneXTRA Feature.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT$XTRAEN=<mode>
Execution command set to control the GpsOneXTRA feature.
Parameter:
Name
Type
Default
Description
<mode>
integer
0
Control GpsOneXTRA feature.
Values:
0
:
Disable GpsOneXTRA feature
1
:
Enable GpsOneXTRA feature
Additional info:
When GpsOneXTRA feature is enabled:
If standalone GNSS session is started and there is no XTRA
assistance data file in device, The XTRA file downloading is
triggered, and it always requires data service.
An XTRA file contains orbit predictions for constellations, which are
valid up to 7 days. With valid XTRA data present, a GNSS engine on
modem can eliminate the need for GNSS navigation data
demodulation over the air and reduce the time required for
generating a position fix.
AT$XTRAEN?

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English