Telit Wireless Solutions LE910C series - AT#MQDISC - Log out and Disconnect from the MQTT Broker

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1799 of 1904 2022-03-04
Not Subject to NDA
3.32.11. AT#MQDISC - Log Out and Disconnect from the MQTT Broker
This command performs the logout and disconnection from to the MQTT broker.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#MQDISC=<instance_number>[,<disc_reason>]
Disconnects gracefully from the MQTT broker, then closes the network
connection
Parameters:
Name
Type
Default
Description
<instance_number>
integer
N/A
Selects the client
instance
Value:
1,2
:
client instance range. to know
maxClients value use test command
<disc_reason>
integer
N/A
Disconnection reason
code
(LE910Cx LInux
exclusive)
Value:
0÷154
:
Disconnect reason code
<disc_reason> only valid if the MQTT version of the corresponding
<instance_number> is set to v5.0. Omit the
<disc_reason> parameter meant the normal disconnection. Please
refer to MQTT version 5.0 for disconnection reason code.