Telit Wireless Solutions LE910C series - AT+GCI - Country of Installation

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 123 of 1904 2022-03-04
Not Subject to NDA
3.2.2.9. AT+GCI - Country of Installation
Set command allows to select the installation country code according to ITU-T35 Annex
A.
ITU-T Recommendation V.25 ter
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT+GCI=<code>
Parameter:
Name
Type
Default
Description
<code>
integer
59
installation country code
Value:
59
:
it currently supports only the Italy country code
AT+GCI?
Read command reports the currently selected country code.
AT+GCI=?
Test command reports the supported values of parameter <code>.