Telit Wireless Solutions LE910C series - AT#WLANDISCONNECT - Disconnect from the Network

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 726 of 1904 2022-03-04
Not Subject to NDA
3.8.9. AT#WLANDISCONNECT - Disconnect from the network
This command is used to disconnect the network.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#WLANDISCONNECT
Execution command will disconnect from the network. Relevant for
client mode only.
AT#WLANDISCONNECT=?
Test command returns OK result code.