Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1038 of 1904 2022-03-04
Not Subject to NDA
3.12.6.6. AT#PCMDELAY - Set delay before close the PCM Clock/SYNC
This command used to set delay before close the PCM Clock/SYNC.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Common
profile
No
-
2
AT#PCMDELAY=<delay>
Set command Set delay before close the PCM Clock/SYNC.
Parameter:
Name
Type
Default
Description
<delay>
integer
0
time in seconds to wait before close the
PCM Clock/SYNC
Value:
0÷10
:
from 0 seconds to 10 seconds
- Delay after the voice call only.
- This parameter is saved in NVM issuing AT&W command.
- The command work only for PCM mode (#DVIEXT=0)
- #PCMDELAY return Error, when I2S mode (#DVIEXT=1)
AT#PCMDELAY?
Read command returns the current <delay> parameters, in the format:
#PCMDELAY: <delay>
AT#PCMDELAY=?

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English