Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1461 of 1904 2022-03-04
Not Subject to NDA
3.21.14. AT#SSLSENDEXT - Send Data through a SSL Socket in Command Mode
This command allows sending data through a secure socket.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#SSLSENDEXT=<SSId>,<bytestosend>[,<Timeout>]
This command allows sending data through a secure socket.
The device responds to the command with the prompt '>'
<greater_than><space> and waits for the data to send.
When <bytestosend> bytes have been sent, operation is automatically
completed.
If data are successfully sent, then the response is OK.
If data sending fails for some reason, an error code is reported.
Parameters:
Name
Type
Default
Description
<SSId>
integer
N/A
Secure Socket Identifier
Value:
1
:
Until now SSL block manage only one socket.
<bytestosend>
string
-
number of bytes to be sent.
Please refer to test command for
range
<Timeout>
integer
100
time-out in 100 ms units.
Value:
10÷5000
:
hundreds of ms.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English