Telit Wireless Solutions LE910C series - ATS5 - Command Line Editing Character

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 269 of 1904 2022-03-04
Not Subject to NDA
3.2.3.6. ATS5 - Command Line Editing Character
The command manages the value of the character recognized by the DCE as a request to
delete from the command line the immediately preceding character.
ITU-T Recommendation V.25 ter
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
ATS5=<char>
Set command sets the value of the character recognized by the device as a
request to delete from the command line the immediately preceding
character.
Parameter:
Name
Type
Default
Description
<char>
integer
8
command line editing character (decimal
ASCII)
Value:
0÷127
:
command line editing character
ATS5?
Read command returns the current value of S5 parameter.
The format of the numbers in output is always 3 digits, left-filled
with 0s.