Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 963 of 1904 2022-03-04
Not Subject to NDA
3.12.1.3. AT+CLVL - Loudspeaker Volume Level
This command allows to set the volume of internal loudspeaker audio output.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Common
profile
No
-
2
AT+CLVLthe value of max can be read by issuing the Test command
Set command is used to select the volume of the internal loudspeaker
audio output of the device.
For LE910Cx ThreadX : <level> factory default=5
AT+CLVL?
Read command reports the current <level> setting of the loudspeaker
volume in the format:
+CLVL: <level>
AT+CLVL=?
Test command returns the supported values of parameter <level>
LE910Cx Linux : The setting is saved using the &W command.
LE910Cx ThreadX : The setting is not saved.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English