Telit Wireless Solutions LE910C series - AT+DR - Data Compression Reporting

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 353 of 1904 2022-03-04
Not Subject to NDA
3.2.6.3. AT+DR - Data Compression Reporting
This command enables the data compression reporting.
ITU-T V.25ter
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
AT+DR=<n>
Set command enables/disables the data compression reporting upon
connection.
Parameter:
Name
Type
Default
Description
<n>
integer
0
enables/disables the data compression
reporting upon connection
Values:
0
:
disable
1
:
enable
Additional info:
If enabled, the following intermediate result code is transmitted
before the final result code:
+DR: <compression>
AT+DR?