Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 381 of 1904 2022-03-04
Not Subject to NDA
3.4.6. AT+CLIR - Calling Line Identification Restriction
The command manages the CLIR service.
3GPP TS 27.007
3GPP TS 22.081
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Specific profile
No
-
2
AT+CLIR=[<n>]
Set command overrides the CLIR subscription when temporary mode is
provisioned as a default adjustment for all following outgoing calls. This
adjustment can be revoked by using the opposite command. This
command refers to CLIR service (see 3GPP TS 22.081), that allows a
calling subscriber to enable or disable the presentation of the Calling Line
Identification (CLI, i.e., the phone number of the caller) to the called party
when originating a call.
This command sets the default behavior of the device in all outgoing calls.
Parameter:
Name
Type
Default
Description
<n>
integer
0
setting of CLIR service
Values:
0
:
CLIR facility according to CLIR service network status
1
:
CLIR facility active (CLI not sent)
2
:
CLIR facility not active (CLI sent)

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English