Telit Wireless Solutions LE910C series - Page 382

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 382 of 1904 2022-03-04
Not Subject to NDA
AT+CLIR?
Read command gives the default adjustment for all outgoing calls (<n>)
and also triggers an interrogation of the provision status of the CLIR
service (<m>), in the form
+CLIR: <n>,<m>
Additional info:
Name
Type
Default
Description
<n>
integer
0
facility status in the Mobile
Values:
0
:
CLIR facility according to CLIR service network
status
1
:
CLIR facility active (CLI not sent)
2
:
CLIR facility not active (CLI sent)
<m>
integer
0
facility status in the Network
Values:
0
:
CLIR service not provisioned
1
:
CLIR service provisioned permanently
2
:
unknown (e.g. no network present)
3
:
CLI temporary mode presentation restricted
4
:
CLI temporary mode presentation allowed
AT+CLIR=?