Telit Wireless Solutions LE910C series - AT#SIOWATERMARK - Configure SIO Tx Watermark Size

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1354 of 1904 2022-03-04
Not Subject to NDA
3.17.56. AT#SIOWATERMARK - Configure SIO Tx Watermark Size
This command sets Configure the buffer size of SIO Tx Watermark.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#SIOWATERMARK=<Low watermark size>,<High watermark size>,<Max
watermark size>
Set command permits to configure the buffer size of SIO Tx Watermark.
Parameters:
Name
Type
Default
Description
<Low watermark
size>
integer
50000
Set the Low buffer size of SIO
Watermark
Value:
1000÷50000
:
Range Value
<High watermark
size>
integer
75000
Set the High buffer size of SIO
Watermark
Value:
2000÷75000
:
Range Value
<Max watermark
size>
integer
108000
Set the Max buffer size of SIO
Watermark
Value:
10000÷108000
:
Range Value
command has to be set before opening socket connection (#SD) to
take effect.