Telit Wireless Solutions LE910C series - Page 1353

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1353 of 1904 2022-03-04
Not Subject to NDA
It permits to slow down TCP when application wants to retrieve data
slowly (for instance: cmd mode), to avoid early RST from server.
Some networks, such as Firstnet, may require a different TCP
scale factor value. Otherwise it recommend to keep the default
value.
AT#TCPMAXWIN?
Read command reports the currently selected <winSize>,<scalefactor> in
the format:
#TCPMAXWIN:<winSize>,<scalefactor>
AT#TCPMAXWIN=?
Test command reports the supported range of values for parameter
<winSize>,<scalefactor>.