Telit Wireless Solutions LE910C series - AT#ENSIM2 - Enable SIM Slot2

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 896 of 1904 2022-03-04
Not Subject to NDA
3.10.18. AT#ENSIM2 - Enable SIM Slot2
This command enables/disables SIM slot2.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#ENSIM2=<mode>
Set command enables/disables SIM slot2.
Parameter:
Name
Type
Default
Description
<mode>
integer
N/A
mode
Values:
0
:
disable
1
:
enable
The new setting is applied to next boot.
In LE910Cx-AP/EU/NF, LE910C1-NA/NS and LE910C1-EUX, the
default value of the parameter <mode> is 0. The default value of all
other models is 1.
AT#ENSIM2?
Read command reports the status of SIM slot2, in the format:
#ENSIM2: <mode>