Telit Wireless Solutions LE910C series - AT+CPAS - Phone Activity Status

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 145 of 1904 2022-03-04
Not Subject to NDA
3.2.2.28. AT+CPAS - Phone Activity Status
Execution command reports the device status in the form shown in Additional info
section.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT+CPAS
Additional info:
Message format returned by the execution command:
+CPAS: <pas>
Name
Type
Default
Description
<pas>
integer
0
phone activity status.
Values:
0
:
ready (device allows commands from TA/TE)
1
:
unavailable (device does not allow commands
from TA/TE)
2
:
unknown (device is not guaranteed to respond to
instructions)
3
:
ringing (device is ready for commands from
TA/TE, but the ringer is active)