Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 446 of 1904 2022-03-04
Not Subject to NDA
3.4.27. AT#SNUM - Subscriber Number
This command writes the MSISDN information related to the subscriber (own number)
in the EFmsisdn SIM file.
3GPP TS 51.011
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#SNUM=<index>[,<number>[,<alpha>]]
This set command writes the MSISDN information related to the
subscriber (own number) in the EFmsisdn SIM file.
Parameters:
Name
Type
Default
Description
<index>
integer
-
the number of the record in the
EFmsisdn file in SIM where the number
must be stored; its range goes from 1 to
a maximum value that varies from SIM to
SIM. If only <index> value is given, then
the EFmsisdn record in location <index>
is deleted.
<number>
string
-
string containing the phone number
<alpha>
string
-
alphanumeric string associated to
<number>; its maximum length varies
from SIM to SIM. Default value is empty
string (""), otherwise the used character
set should be the one selected with
+CSCS. The string could be written
between quotes; the number of
characters depends on the SIM. If empty

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English