Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 366 of 1904 2022-03-04
Not Subject to NDA
Network
3.4.1. AT+CNUM - Subscriber Number
This command returns the MSISDN (if the phone number of the device has been stored
in the SIM card).
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT+CNUM
Execution command returns the MSISDN (if the phone number of the
device has been stored in the SIM card) in the following format:
+CNUM: <alpha>,<number>,<type>[<CR><LF>
+CNUM: <alpha>,<number>,<type>[...]]
The parameters are described in the Additional info section.
Additional info:
List of the parameters meaning.
Name
Type
Default
Description
<alpha>
string
-
alphanumeric string associated
to <number>; The character set
depends on the value set with
+CSCS.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English