Telit Wireless Solutions LE910C series - AT#CMAR - Selective Master Reset

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 215 of 1904 2022-03-04
Not Subject to NDA
3.2.2.59. AT#CMAR - Selective Master Reset
This AT command is used to reset user data to factory default on Modem NV and AP
AppZone file system.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#CMAR=<unused>[,<resetType>]
Set command resets user data. The user data on Modem NV and AP
AppZone file system will be reset to default.
Parameters:
Name
Type
Default
Description
<unused>
integer
0
this parameter is not really used, and it
is present only for backward
compatibility.
Value:
0
:
dummy parameter
<resetType>
integer
0
the user can select which kind of
format to perform; if omitted, the
command performs a complete format.
Values:
0
:
format all
1
:
format Modem NV
3
:
format AP AppZone file system
If parameter <resetType> is omitted, the command has the same
behavior as AT#CMAR=0,0.