Telit Wireless Solutions LE910C series - AT+CGEQREQ - 3 G Quality of Service Profile (Requested)

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 792 of 1904 2022-03-04
Not Subject to NDA
3.9.10. AT+CGEQREQ - 3G Quality of Service Profile (Requested)
The command allows to specify a 3G quality of service profile for the context identified by
the context identification parameter.
[1] 3GPP TS 27.007
[2] 3GPP TS 23.107
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT+CGEQREQ=[<cid>[,<Traffic class>[,<Maximum bitrate UL>[,<Maximum
bitrate DL>[,<Guaranteed bitrate UL>[,<Guaranteed bitrate DL>[,<Delivery
order>[,<Maximum SDU size>[,<SDU error ratio>[,<Residual bit error
ratio>[,<Delivery of erroneous SDUs>[,<Transfer delay>[,<Traffic handling
priority>[,<Source Statistics Descriptor>[,<Signalling
Indication>]]]]]]]]]]]]]]]
Set command specifies a 3G Quality of Service profile for the context
identified by the (local) context identification parameter <cid> which is
used when the MT sends an Activate PDP Context Request message to the
network.
Parameters:
Name
Type
Default
Description
<cid>
integer
-
PDP context identification (see
+CGDCONT command).
<Traffic class>
integer
4
traffic class
Values:
0
:
conversational
1
:
streaming
2
:
interactive