Telit Wireless Solutions LE910C series - AT#WLANMACACCEPT - Add;Remove MAC Address To;From Accept List

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 762 of 1904 2022-03-04
Not Subject to NDA
3.8.29. AT#WLANMACACCEPT - Add/Remove MAC address to/from accept list
This command allows to add/remove MAC address to/from accept list.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#WLANMACACCEPT=<mode>,<mac_address>
Set command allows to add/remove MAC address to/from accept list.
Relevant for AP mode only.
Parameters:
Name
Type
Default
Description
<mode>
integer
N/A
Accept list Mode
Values:
0
:
Remove from accept list
1
:
Add to accept list
<mac_address>
string
-
MAC Address.
NOTE: Mac address should be
written with ':' between each Hexa
number.
Example:
00:A0:C6:00:00:17
AT#WLANMACACCEPT?
Read command returns the accept list:
AT#WLANMACACCEPT=?
Test command returns the supported range of values for parameters.