Telit Wireless Solutions LE910C series - AT#SKTSAV - Socket Parameters Save

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1342 of 1904 2022-03-04
Not Subject to NDA
3.17.50. AT#SKTSAV - Socket Parameters Save
This command stores the current socket parameters in the NVM.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#SKTSAV
Execution command stores the following socket parameters in the NVM:
24. User ID
25. Password
26. Packet Size
27. Socket Inactivity Time-Out
28. Data Sending Time-Out
29. Socket Type (UDP/TCP)
30. Remote Port
31. Remote Address
32. TCP Connection Time-Out
If some parameters have not been previously specified then a
default value will be stored.
AT#SKTSAV=?
Test command returns OK result code.
•
AT#SKTSAV
OK
socket parameters have been saved in NVM