Telit Wireless Solutions LE910C series - AT#SLEDSAV - Save STAT_LED GPIO Setting

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1127 of 1904 2022-03-04
Not Subject to NDA
3.15.13. AT#SLEDSAV - Save STAT_LED GPIO Setting
This command allows to save the current STAT_LED GPIO setting.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#SLEDSAV
Execution command saves the STAT_LED GPIO setting in NVM.
AT#SLEDSAV=?
Test command returns OK result code.