Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 350 of 1904 2022-03-04
Not Subject to NDA
3.2.6. Modulation & Compression Control
3.2.6.1. AT%E - Line Quality and Auto Retrain
This command is used for line quality monitoring and auto retrain or fall back/fall
forward.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT%E[<n>]
Execution command has no effect and is included only for backward
compatibility with landline modems.
Parameter:
Name
Type
Default
Description
<n>
integer
-
this parameter is not really used, and it is
present only for backward compatibility
If <n> parameter is not specified, the default value is considered

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English