Telit Wireless Solutions LE910C series - AT#TXCAL - TX Calibration

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 245 of 1904 2022-03-04
Not Subject to NDA
3.2.2.76. AT#TXCAL - TX Calibration
This command change the Tx power level for the band specified.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#TXCAL=<band>[,<value1>,<value2>,……<value16>]
Set command change the Tx power level for the band specified.
Parameters:
Name
Type
Default
Description
<band>
integer
N/A
numeric parameter indicating the band.
Values:
0
:
GSM 850
1
:
GSM 900
2
:
DCS 1800
3
:
PCS 1900
The set command ( AT#TXCAL=<bnd> ) causes the values for <bnd>
band to reuse the default ones
After command set, you have to reboot modem.
AT#TXCAL?
Read command returns the current parameter settings for each band in
the format:
#TXCAL: <value_1>,<value_2>,....,<value_16>
#TXCAL: <value_1>,<value_2>,....,<value_16>