Telit Wireless Solutions LE910C series - AT#WLANSSID - Change SSID Name

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 718 of 1904 2022-03-04
Not Subject to NDA
3.8.3. AT#WLANSSID - Change SSID name
This command is used to change the SSID name.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#WLANSSID=<ssid>
Set command is used to change the SSID name.
Parameter:
Name
Type
Default
Description
<ssid>
string
-
SSID
The <ssid> length must be of 32 characters or less.
AT#WLANSSID?
Read command returns the current SSID in the format:
#WLANSSID: <ssid>
AT#WLANSSID=?
Test command returns OK result code.