Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 495 of 1904 2022-03-04
Not Subject to NDA
3.4.43. AT#MONI - Cell Monitor
This command is both a set and an execution command.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#MONI[=[<number>]]
Set command sets one cell out of seven, in a neighbor list of the serving
cell including it, from which extract GSM/LTE related information.
After entering the set command, enter the execution command
AT#MONI<CR> to get the GSM/LTE related information for the selected
cell and dedicated channel (if exists) in the format shown, for each
network, in the Additional info section.
Parameter:
Name
Type
Default
Description
<number>
integer
-
the parameter meaning depends on the
network, see Additional info section.
Additional info:
GSM network
Name
Type
Default
Description
<number>
integer
0
GSM
network
Values:
0÷6
:
it is the ordinal number of the cell, in the
neighbor list of the serving cell.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English