Telit Wireless Solutions LE910C series - AT+CREG - Network Registration Status

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 370 of 1904 2022-03-04
Not Subject to NDA
3.4.3. AT+CREG - Network Registration Status
The command enables/disables the network registration unsolicited result code (URC)
and selects its presentation format.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
AT+CREG=[<mode>]
Set command enables/disables the network registration unsolicited result
code and selects one of the two available formats:
short format: +CREG: <stat>
long format: +CREG: <stat>[,<lac>,<ci>[,<AcT>]]
The parameter meanings are shown in Unsolicited code value section.
Parameter:
Name
Type
Default
Description
<mode>
integer
0
enables/disables the network registration
unsolicited result code and selects one of
the two formats: shot or long format.
URC short format is displayed every time
there is a change in the network
registration status.
URC long format is displayed every time
there is a change of the network cell.
Values: