Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 235 of 1904 2022-03-04
Not Subject to NDA
3.2.2.71. AT#CLATENA - Enable/Disable the CLAT interface
Enable/Disable the CLAT interface.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#CLATENA=<cid>,<enable>
This command is used to enable/disable the Modem CLAT(Customer-side
Address Translator) functionality to support communication to IPv4
servers on IPv6 only cellular networks.
Parameters:
Name
Type
Default
Description
<cid>
integer
N/A
(PDP Context Identifier) numeric
parameter which specifies a particular
PDP context definition.
Value:
1÷max
:
where the value of max is returned by the Test
command
<enable>
integer
0
enable or disable CLAT
Values:
0
:
disable CLAT interface
1
:
enable CLAT interface
AT#CLATENA?
Read command returns the current settings for each defined context in
the format:

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English