Telit Wireless Solutions LE910C series - AT#PLMNMODE - PLMN List Selection

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 433 of 1904 2022-03-04
Not Subject to NDA
3.4.22. AT#PLMNMODE - PLMN List Selection
Set command apply to new operator names depending on the parameter <mode>.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#PLMNMODE=<mode>
Parameter:
Name
Type
Default
Description
<mode>
integer
1
Set command apply's to new operator
names depending on the parameter
<mode>
Values:
0
:
previous operator names
1
:
new operator names
If the <mode>=1, AT+COPN command shows new operator names.
When the AT#ENS value is 1 then the AT#PLMNMODE value will
always be 1 after reboot. (See #ENS for more details).
AT#PLMNMODE?
Read command returns current value of the parameter <mode>:
#PLMNMODE: <mode>