Telit Wireless Solutions LE910C series - AT+CSMP - Set Text Mode Parameters

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 601 of 1904 2022-03-04
Not Subject to NDA
3.6.5. AT+CSMP - Set Text Mode Parameters
This command is used to select values for additional parameters for storing and sending
SMS when the text mode is used (AT+CMGF=1).
3GPP TS 23.40
3GPP TS 23.038
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Other
No
-
2
AT+CSMP=[<fo>[,<vp>[,<pid>[,<dcs>]]]]
Set command is used to select values for additional parameters for
storing and sending SMS when the text mode is used (AT+CMGF=1).
Parameters:
Name
Type
Default
Description
<fo>
integer
17
first octet of SMS-SUBMIT or SMS-DELIVER
PDU, as described in 3GPP TS 23.040
bit 0/1 = Message Type Indicator
bit 2 = Reject Duplicates
bit 3/4 = Validity Period Format
bit 5 = Status Report Request
bit 6 = User Data Header Indicator
bit 7 = Reply Path
Value:
0÷255
:
mask
<vp>
mixed
167
Validity Period, the format depends on Validity
Period Format in <fo>, as described in 3GPP
TS 23.040: