Telit Wireless Solutions LE910C series - AT+CMGR - Read Message

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 631 of 1904 2022-03-04
Not Subject to NDA
3.6.14. AT+CMGR - Read Message
This command is used to read a message.
3GPP TS 27.005
3GPP TS 23.040
3GPP TS 23.038
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT+CMGR=<index>
Execution command reports the message with location value <index> from
<memr> message storage (<memr> is the message storage for read and
delete SMs as last settings of command +CPMS).
Parameter:
Name
Type
Default
Description
<index>
integer
-
message index. The command output
depends on the last settings of command
+CMGF (message format to be used). There
are two modes:
- PDU mode
- Text mode
See the following Additional info sections.
Additional info:
In case of PDU mode, if there is a message in location <index>, the output
has the following format:
+CMGR: <stat>,<alpha>,<length><CR><LF><pdu>