Telit Wireless Solutions LE910C series - AT#SLASTCLOSURE - Detect the Cause of a Socket Disconnection

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1259 of 1904 2022-03-04
Not Subject to NDA
3.17.17. AT#SLASTCLOSURE - Detect the Cause of a Socket Disconnection
The command detects the cause of a socket disconnection.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#SLASTCLOSURE=<connId>
Execution command reports the socket disconnection cause.
Parameter:
Name
Type
Default
Description
<connId>
integer
N/A
socket connection identifier
Value:
1÷conMax
:
socket connection identifier. conMax value is
returned by test command
Additional info:
The execution command reports the disconnection cause of the
selected socket. The format of the returned message is:
#SLASTCLOSURE: <connId>,<cause>
Name
Type
Default
Description
<cause>
hex
0
socket
disconnection
cause.
Values:
0
:
not available (socket has not yet been closed)