Telit Wireless Solutions LE910C series - AT+PACSP - Network Selection Menu Availability

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 196 of 1904 2022-03-04
Not Subject to NDA
3.2.2.51. AT+PACSP - Network Selection Menu Availability
This command returns the current value of the <mode> parameter which is PLMN mode
bit in the CSP file with SIM.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT+PACSP?
Read command returns the current value of the <mode> parameter in
the format:
+PACSP<mode>
Additional info:
Read command response parameter
Name
Type
Default
Description
<mode>
integer
N/A
returns the PLMN mode bit (in CSP
file on the SIM)
Values:
0
:
restriction of menu option for manual PLMN
selection
1
:
no restriction of menu option for Manual
PLMN selection
It can support only AT&T specific module.
AT+PACSP=?