Telit Wireless Solutions LE910C series - AT#SSLS - Report the Status of a SSL Socket

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1440 of 1904 2022-03-04
Not Subject to NDA
3.21.7. AT#SSLS - Report the Status of a SSL Socket
This command reports the status of secure sockets.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#SSLS=<SSId>
The command reports the status of secure sockets. The response message of the
command can have the following formats:
if secure socket is connected, the format is:
#SSLS: <SSId>,<ConnectionStatus>,<CipherSuite>
otherwise:
#SSLS: <SSId>,<ConnectionStatus>
The response messages parameters are described in the Additional info section.
Parameter:
Name
Type
Default
Description
<SSId>
integer
1
Secure Socket Identifier.
Value:
1
:
only one SSL socket is supported
Additional info:
List of the meaning of the response message parameters.
Name
Type
Default
Description
<CipherSuite>
integer
0
Cipher Suite identifier