Telit Wireless Solutions LE910C series - Page 1441

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1441 of 1904 2022-03-04
Not Subject to NDA
In case of LE910C1-EUX/LE910C1-
SAX/LE910C1-SVX/LE910Cx-WWX,
refer to Note.
Values:
0
:
Chiper Suite is chosen by remote Server
1
:
TLS_RSA_WITH_3DES_EDE_CBC_SHA
2
:
TLS_RSA_WITH_AES_128_CBC_SHA
3
:
TLS_RSA_WITH_AES_128_CBC_SHA256
4
:
TLS_RSA_WITH_AES_256_CBC_SHA
5
:
TLS_RSA_WITH_AES_256_CBC_SHA256
6
:
TLS_DHE_RSA_WITH_AES_128_CBC_SHA
7
:
TLS_DHE_RSA_WITH_AES_256_CBC_SHA
8
:
TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
9
:
TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
10
:
TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
<ConnectionStatus>
integer
N/A
Connection Status identifier
Values:
0
:
socket disabled
1
:
connection closed
2
:
connection open
This command can be issued even if the <SSId> is not enabled.
Supported CipherSuites for LE910C1-EUX/LE910C1-SAX/LE910C1-
SVX/LE910Cx-WWX -