Telit Wireless Solutions LE910C series - AT+CGPIAF - Printing IP Address Format

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 823 of 1904 2022-03-04
Not Subject to NDA
3.9.21. AT+CGPIAF - Printing IP Address Format
This command selects the printout format of the IPv6 address.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT+CGPIAF=[<IPv6_AddressFormat>[,<IPv6_SubnetNotation>[,<IPv6_LeadingZer
os> [,<Pv6_CompressZeros>]]]]
Parameters:
Name
Type
Default
Description
<IPv6_AddressFormat>
integer
0
selects the IPv6 address
format. Relevant for all AT
command parameters that
can hold an IPv6 address.
Values:
0
:
use IPv4-like dot-notation. IP
addresses, and subnetwork mask if
applicable, are dot-separated.
1
:
use IPv6-like colon-notation. IP
address, and subnetwork mask if
applicable and when given explicitly,
are separated by a space.
<IPv6_SubnetNotation>
integer
0
selects the subnet-notation
for remote address and
subnet mask. Setting does
not apply if IPv6 address
format
<IPv6_AddressFormat>=0.