Telit Wireless Solutions LE910C series - AT#SA - Socket Accept

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1252 of 1904 2022-03-04
Not Subject to NDA
3.17.14. AT#SA - Socket Accept
Execution command accepts an incoming socket connection.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#SA=<connId>[,<connMode>]
Execution command accepts an incoming socket connection after an URC
SRING: <connId>
Parameters:
Name
Type
Default
Description
<connId>
integer
N/A
Socket connection identifier.
Value:
1÷max
:
Socket connection identifier value (max is
returned by the Test command)
<connMode>
integer
0
Connection mode, as for
command #SD.
Values:
0
:
online mode connection
1
:
command mode connection
The SRING URC has to be a consequence of a #SL issue.
Setting the command before to having received a SRING will result
in an ERROR indication, giving the information that a connection
request has not yet been received.