Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 804 of 1904 2022-03-04
Not Subject to NDA
3.9.13. AT+CGCMOD - Modify PDP Context
The execution command is used to modify the specified PDP context(s) with respect to
QoS profiles and TFTs.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT+CGCMOD=[<cid_n>[,...]]
After command has completed, the MT returns to V.250 online data state.
If the requested modification for any specified context cannot be achieved,
an ERROR or +CME: ERROR response is returned. Extended error
responses are enabled by the +CMEE command.
For EPS, the modification request for an EPS bearer resource will be
answered by the network by an EPS bearer Modification request. The
request must be accepted by the MT before the PDP context effectively
changed.
Parameter:
Name
Type
Default
Description
<cid_n>
integer
-
generic PDP context identifier.
If no parameters are specified (no <cid_n> specified), the command
modifies all active contexts.
AT+CGCMOD=?
Test command returns a list of <cid_n>s associated with active contexts.
+CGCMOD: (list of <cid_n>s associated with active contexts)

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English