Telit Wireless Solutions LE910C series - AT#PROTOCOLCFG - Configure Protocol Parameters

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1284 of 1904 2022-03-04
Not Subject to NDA
3.17.27. AT#PROTOCOLCFG - Configure Protocol Parameters
This command configures the parameters needed to specific protocols.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#PROTOCOLCFG=<protocol>,<cid>[,<UNUSED_1>[,<UNUSED_2>[,<UNUSED_3
>]]]
Set command defines the parameters needed to specific protocols.
Parameters:
Name
Type
Default
Description
<protocol>
string
N/A
protocol to be configured
Values:
"FTP"
:
FTP protocol
"SMTP"
:
SMTP protocol
"PING"
:
PING service (ICMP protocol)
"SSL"
:
SSL protocol
<cid>
integer
N/A
cid of the PDP context to be used for
the specified protocol
Value:
1÷max
:
identifier (max is returned by the test
command)
<UNUSED_1>
mixed
-
Reserved 1
<UNUSED_2>
mixed
-
Reserved 2
<UNUSED_3>
mixed
-
Reserved 3