Telit Wireless Solutions LE910C series - AT+CGEQNEG - 3 G Quality of Service Profile (Negotiated)

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 799 of 1904 2022-03-04
Not Subject to NDA
3.9.11. AT+CGEQNEG - 3G Quality of Service Profile (Negotiated)
This command allows the TE to retrieve the negotiated 3G quality of service returned in
the Activate PDP Context Accept/Modify message.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT+CGEQNEG=[<cid>[,<cid>[,…]]]
Set command returns the negotiated 3G QoS profile for the specified
context identifiers, <cid>s. The QoS profile consists of a number of
parameters, each of which may have a separate value.
+CGEQNEG: <cid>, <Traffic class>, <Maximum bitrate UL> ,<Maximum
bitrate DL>, <Guaranteed bitrate UL>, <Guaranteed bitrate DL>, <Delivery
order>, <Maximum SDU size>, <SDU error ratio>, <Residual bit error
ratio>, <Delivery of erroneous SDUs>, <Transfer delay>, <Traffic handling
priority>[<CR><LF>
+CGEQNEG: <cid>, <Traffic class>, <Maximum bitrate UL>, <Maximum
bitrate DL>, <Guaranteed bitrate UL>, <Guaranteed bitrate DL>, <Delivery
order>, <Maximum SDU size>, <SDU error ratio>, <Residual bit error
ratio>, <Delivery of erroneous SDUs>, <Transfer delay>, <Traffic handling
priority>[...]]
Parameters:
Name
Type
Default
Description
<cid>
integer
-
PDP context identification (see +CGDCONT
command)